SUPRA SERIES MEETS YOUR EXPECTATIONS
A machine that answers for every drop of fuel that you fill into your tank and provides
highest amount of work and excavation…
Comfort and performance
under the toughest conditions…
High efficiency for the operator even in
the longest working hours…
Excavation work on the toughest grounds, tons of sand, gravel, debris and long working hours…
Loading works, channel excavation or crushing works…
SUPRA Series backhoe loaders overcome every work that you encounter. They provide comfortable working environment and as easy use as possible in tough and long working hours for you.
With SUPRA Series, your machine stays on work longer and spends less time for maintenance and repair, thus you increase efficiency.
CABIN INTERIOR
Engine
The SUPRA Series engine is one of the most economical and durable in its class. The turbocharged, 4.400 cm³ engine maintains high torque even at low rpms.
6-forward 3-reverse fully automatic transmission used in the SUPRA Series allows smooth driving. The optional torque convertor lock (lock-up) provides fuel economy which is automatically engaged in the 5th and 6th gear.
The optional MSS (Motion Stabilizer System) works as a shock absorber on the loader lift cylinders. By damping the shock that occurs when a full loader bucket is used on rough terrain, it provides a comfortable ride that is not only smooth but also fast as well.
Heavy-Duty Type Axles have been used in the ALPHA Series in scope of both load carriage and durability.
The optional piston type hydraulic pump provides load sensitive hydraulic power as much as the operator needs with precise control independently from the amount of the load and engine rpm. It works with efficiency up to %95.
The optional FLOWSHARING valves provides excellent hydraulic control independently from the amount of the load and operator’s skills for various field works such as pipe lying and channel trenching.
It allows simultaneous boom, arm and bucket motions even in the low rpms and provides the opportunity to work in noise restricted areas such as hospital, school and city center.
As an optional equipment, flow charging valves with extra regeneration feature applied on the boom and arm lines provide more efficient hydraulic power and prevent cavitation.
The highest traction force is provided with LSD (limited slip differential) acting on front axle and differential lock on rear axle to prevent skidding on stone gravel, mud or icy surfaces. Thus, period of tire replacement, working cycle and fuel efficiency have been improved.
In conventional backhoe loader cabins, while the operator is controlling the machine in the loading and excavation position, he has to turn his head by 90° to the right and left side in order to check the gauges.
In SUPRA Series, operator may easily check gauges through LCD screen put on the front and rear area while he is sitting in the loading and excavation position. Thus, the operator may easily check the gauges without taking his eyes off the driving direction. This working position allows operator to work for longer periods without suffering from neck and back aches.
One of the characteristics that makes the SUPRA Series different is the superior performance of front loader. Thanks to the bucket and arm breakout force of SUPRA Series, the machine drive the load without being stressed. Boom construction intended for heavy conditions has been designed for durability for long years. 6-in-1 loading bucket (1,1 m³ in B Series – 1,2 m³ in S Series) provides advanced level of loading performance. Thanks to the carefully designed bucket geometry, effective use of bucket capacity is obtained. Settling blade that has been fixed with bolted system may be used double-sided by easy exchange by the operator and without the need of service. Hinged joint on the cylinders of claw opening and closing prevents damages on the cylinders when lateral loads are exposed to during driving the loads. Thanks to the proportional control button on the front control lever, easy use is provided to the operator, claw speed and angle can easily be adjusted.
Forward-reverse direction control on front loader control lever TIPSHIFT allows operator to make quicker manoeuvre during loading operation. It is provided so that the operator can make these controls easily and concentrate on loading process better.
In conventional loading works and manoeuvrability in limited space, the operator apply both loader and forward-reverse commands from a single point without loosing steering wheel handling by using the TIPSHIFT button.
It provides occupational safety and comfort, so operator uses it without breaking the contact with steering wheel and loader controller.
SUPRA Series excavator group provided and designed for tough geographical and heavy working conditions increases the productivity with its solid construction and optional efficient hydraulic system that provides maximum breakout force even in the low rpms and that has maximum 163 lt. /min oil flow.
Rear joysticks that are optional in SUPRA models allow for easy control in the works such as lifting and lowering that require precision for operators. Joystick consoles that may be adjusted independently from each other provide ergonomic working environment.
Long hours of excavation works become pleasure with SUPR A Series that has wide visibility and ergonomic working environment.
SUPRA Series that has excellent weight distribution and wide stabilizers provides safer excavation opportunity in sloppy lands. Additional hydraulic line that is maintained as standard kit for hydraulic braker and attachment use does not prevent visibility during excavation and is not damaged in deep excavations.
Cushioning system in the excavation cylinder softens the movements at the ends of strokes, absorbs the impacts and prolongs the machine life.
Telescopic arm that has digging depth up to 5.80 m. provides an advantage in deep excavations and the works that require long reach.
What can be more enjoyable than a work running without any problem?
BrandPerkins
Model1204F-E44TAN Diesel Engine
Number of cylinders4
Bore & Stroke105 x 127 mm
Displacement4400 cc
Maximum Power99.8 Hp @ 2200 rpm
Maximum Torque450 Nm @ 1400 rpm
TypeClosed Center System
Pump Flow Rate163 lt
System Pressure250 bar
TypeAutoshift
Torque Convertor Lock (Lock-Up) Available
Number of Gear6 forward - 3 reverse
Stall Ratio 2.38:1
1st Gear6 km/h
2nd Gear9 km/h
3rd Gear12 km/h
4th Gear20 km/h
5th Gear28 km/h
6th Gear40 km/h
6-in-1 Bucket Capacity1.2 m³
Max. bucket breakout force8270 kgf
Max. loading arm breakout force7427 kgf
Lifting capacity to maximum height3687 kgf
Bucket Capacity0.18 m³
Max. bucket breakout force7021
Max. dipper breakout force3161
Engine Oil Pump8.8 lt
Engine Cooling System22 lt
Fuel Tank150 lt
Hydraulic Oil Tank70 lt
Standard Machine9580 kg
